Asme Section V Article 9 Site

Do you need assistance creating a or a technician checklist ? Share public link

to remember:

Technicians must verify light intensity using a calibrated light meter prior to starting the examination, or use a verified, consistent light source. Access and Viewing Angles

The illumination levels and the specific techniques used to verify them. Personnel qualification requirements. 3. Physical Capabilities and Lighting Requirements asme section v article 9

The sequence of the examination (e.g., before, during, or after fabrication/testing). The criteria used to evaluate and document indications. Personnel Qualifications

The accuracy of a visual examination relies entirely on the inspector's physical vision. Article 9 mandates strict vision testing for all personnel conducting these inspections.

[ Eye / Camera ] \ \ Max 24 inches (600 mm) \ ______________\_________________ [Surface] Angle >= 30° 4. Direct vs. Remote Visual Examination Do you need assistance creating a or a technician checklist

Internal and external surfaces of vessels, pumps, and valves. Mechanical assemblies and structural attachments.

Article 9 also outlines how an inspection procedure itself is qualified. When required by the referencing Code Section, a visual examination procedure must be demonstrated to be effective. The demonstration can be performed using a fine line , an artificial imperfection, or a simulated condition located on a surface similar to the one to be examined. This ensures the procedure can reliably detect a small, relevant flaw.

• Change in the type of visual aids used.• Change in the surface preparation method.• Decrease in the minimum light intensity.• Change in the remote visual equipment model. Personnel qualification requirements

The examiner compares all observed surface anomalies against the specific acceptance standards found in the referencing code section (e.g., ASME Section VIII, Div. 1, Mandatory Appendix 4 or UW-35). Cracks, incomplete fusion, and severe undercut are typically grounds for immediate rejection. The Inspection Report

Unlike other NDE methods that require complex radiation or magnetic fields, Article 9 relies on light and human vision (or optical aids). However, it enforces strict parameters to eliminate human error and subjectivity. Essential and Nonessential Variables

Performed when the inspector has an unobstructed line of sight to the component. The eye must be positioned within a specific distance and angle relative to the surface.

All visual examinations must be performed in accordance with a written procedure. According to Article 9, this procedure must detail all essential and nonessential variables and include, at a minimum, the following information:

Article 9 places a heavy emphasis on the qualifications of the person performing the visual examination, recognizing that the inspector is the most critical variable.