User Login
Google/Facebook login
This login method has been cancelled. Please contact us in case of problems.
| Feature | CM352 Portable | Fixed/Industrial Inhibitor | | :--- | :--- | :--- | | Application method | Hand spray, brush, wipe | Dip tank, circulating pump, fogging system | | Batch size | Small (1–20 liters) | Bulk (200–20,000 liters) | | Film thickness | Thin (0.5–2 µm) | Variable (can be 5–50 µm) | | Protection duration | 3–12 months indoors | 12–36 months + VCI packaging | | Best for | Spot repairs, field use, maintenance | Mass production, long-term storage |
: Required for various Hartzell Alert Service Bulletins (ASBs) to treat mounting bolt recesses and staking pins. Application Tips for the Hangar Prep the Surface : Clean the area using a suitable solvent, such as Stoddard solvent CM23 Hartzell Propeller , and an abrasive pad if corrosion is already present. The "Cup and Brush" Method : For precise portable application, spray
based on these service letters for your maintenance records? HC-SL-61-364 - SERVICE LETTER
: Wear chemical-resistant gloves, safety shoes, and splash-proof goggles if there is a risk of misting. Environmental Precautions corrosion inhibitor cm352 portable
It works by forming a microscopic, molecular protective barrier on the metal surface. This barrier isolates the metal from corrosive agents, including: Moisture (water) Salts (chloride ions) Other contaminants How Does It Work?
I can provide specific calibration protocols and reagent recommendations tailored to your application. Share public link
Deploy the portable CM352 inhibitor across all unpainted metal surfaces. Coat internal recesses, pins, and side walls uniformly. | Feature | CM352 Portable | Fixed/Industrial Inhibitor
Visually examine the counterweight surfaces, mounting bolt recesses, side walls, and staking pins for any early signs of oxidation or paint bubbling. 2. Surface Decontamination
Manually scrub away surface oxides using a fine abrasive pad (referenced as CM47) or approved equivalent.
Portable spray kits, aerosolized canisters, or precision brush applicators allow rapid deployment during regularly scheduled line checks. Step-by-Step Field Application Protocol I can provide specific calibration protocols and reagent
: Before application, surfaces must be cleaned. Industry standards often specify using a solvent like Stoddard solvent (CM23) and an abrasive pad (CM47) to remove existing corrosion or debris. Method of Application Brush Application
Portable cans must be monitored for manufacture dates. Expired propellants or separated chemical bases can result in uneven films, which compromises the integrity of the corrosion barrier.
Always consult the manufacturer’s Safety Data Sheet (SDS) and technical data sheet (TDS) before use. This guide is for general reference.
