Repeater Mode | Dir 850l

Under the wireless connection settings, change the to connect as a client.

The router will now display a list of available wireless networks. or click "Scan" to find your main router's network name (SSID). Select your main network.

Click to view available networks. Select your main router's Wi-Fi network. dir 850l repeater mode

When configured as a bridge or repeater, the DIR-850L loses its default IP address. Check your primary router’s DHCP client list to find the new IP address assigned to the DIR-850L to access its configuration page again. To help find the right configuration path, let me know:

Are you experiencing or just dropped connections ? Under the wireless connection settings, change the to

Is your Wi-Fi signal weak in certain parts of your house? The is a capable dual-band router that can do more than just sit by your modem. By configuring the DIR-850L repeater mode , you can transform this old or secondary router into a powerful range extender to eliminate dead zones and extend your network coverage .

D-Link interfaces vary slightly depending on the firmware version (Hardware Version A uses the classic orange/black interface, while Hardware Version B uses the modern white/grey interface). Method A: For Modern Firmware (White/Grey Interface) Navigate to the menu at the top and click Network . Select your main network

Release the button and wait two minutes for the router to reboot. Step 2: Access the D-Link Setup Page

: Plug an Ethernet cable from a LAN port on your main router into a LAN port (not the Internet/WAN port) on the DIR-850L. Can it be a Wireless Repeater?