Staples 17466 Laminator Manual Jun 2026

| Problem | Likely Cause | Solution | | --- | --- | --- | | Document wrinkles | Pouch inserted crooked or too fast | Let machine pull straight; wait for green light | | Bubbles / cloudy finish | Pouch too thick (>3 mil) or insufficient heat | Use 3 mil pouches; warm up 5+ minutes | | Machine won’t turn on | Outlet dead or internal fuse | Try different outlet; contact Staples support | | Pouch sticks to rollers | Overheating or empty pouch | Turn off, let cool, clean rollers | | Green light never appears | Thermistor fault | Unplug 30 min; try again or replace unit |

Note: For further troubleshooting, always check for the specific, updated manual on Staples support pages. 5. Maintenance and Storage staples 17466 laminator manual

: Plug the unit into a grounded outlet. Switch the power button (typically located at the rear) to the ON position. Select Setting : | Problem | Likely Cause | Solution |

Unplug the machine immediately. This indicates a potential thermal sensor failure. Continuing to run the machine could cause overheating or a fire hazard. To help me give you the best advice, could you let me know: Switch the power button (typically located at the

You're looking for the manual for the Staples 17466 laminator!

Rear-mounted jam release lever (ABS function) 2. Safety Precautions and Setup