/ip/proxy/set enabled=yes port=8080 parent-proxy=172.16.10.2 parent-proxy-port=10808 Use code with caution.
Follow the on-screen instructions to press the physical reset button or power-cycle the device within the specified time window. Step 2: Configure Network Interfaces and NAT
: Once running, you can access the 3x-ui web interface to configure your V2Ray client or server. The default port is usually 2053 .
If your MikroTik router doesn't support containers, an easier method is to run V2Ray on a device on your local network. You would then point your router to that device as a gateway for proxy traffic. v2ray mikrotik
Because MikroTik natively routes IP packets and standard V2Ray runs as an application-level proxy, the cleanest method in RouterOS v7 is using forwarding or Mangle rules with an external routing table if utilizing a transparent proxy inbound.
/container/config/set registry-url=https://registry-1.docker.io tmpdir=pull
Elara leaned back, the blue light of the router reflecting in her eyes. The wall was still there, but for those behind her MikroTik, it had become as transparent as glass. Want to try this setup yourself? V2Ray JSON configuration /ip/proxy/set enabled=yes port=8080 parent-proxy=172
After this command, a full power cycle (turn the router off and on) is required to finalize the activation.
First, give the container a static IP and enable IP forwarding inside the container. Then, on MikroTik:
# Create an address list of geo-blocked IP ranges or specific websites /ip/firewall/address-list/add list=Proxy_Required address=91.198.174.192/24 # Create a mangle rule to flag packets /ip/firewall/mangle/add chain=prerouting src-address=192.168.88.0/24 dst-address-list=Proxy_Required action=mark-routing new-routing-mark=route-to-proxy passthrough=yes Use code with caution. Step 3: Define the External Route The default port is usually 2053
For a seamless MikroTik setup, configure an inbound or http listener on port 10808 .
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
/ip dns set use-doh-server=https://cloudflare-dns.com verify-ssl-certificate=yes /ip dns static add name=cloudflare-dns.com address=1.0.0.1 Use code with caution. Troubleshooting and Performance Verification
Set the container directory: