Locate the disk marked "Iomega" or matching the ~465 GB usable capacity.
The is a high-capacity network-attached storage (NAS) device designed for home or small office use. 1. Initial Hardware Setup
Use the TV Out or Video button on the Iomega remote control to cycle through output resolutions until the picture stabilizes. Issue 2: Drive Works on Computer but Shows Empty on TV Iomega Mdhd500 N Manual
Ensure the blue LED light on the drive enclosure is illuminated. USB ports do not provide enough power to run 3.5-inch drives; the wall adapter must be plugged in.
Before powering the device, ensure you have a clear space near your router. Locate the disk marked "Iomega" or matching the
Plug the rectangular end of the USB cable (Type-A) into an open port on your PC or Mac. Flip the power switch on the rear panel to the position.
UPnP and DLNA certification for media streaming (supports JPG image formats). 1WorldSync Setup and Connection Physical Connection: Initial Hardware Setup Use the TV Out or
: Plug the square end of the USB cable into the drive and the flat end into an open USB 2.0 port on your computer.
The back panel of the MDHD500-N features a specific layout of ports required for both data transfer and television playback.
Are you trying to connect it to a or a Mac ? What video format or extension are you trying to play back? Are you getting a specific error message on your TV screen?
The audio track inside the video container might be encoded in DTS or AAC, which the drive cannot decode. Convert the audio track to MP3 or Stereo AC3 .