Disclaimer: This article is for informational purposes. Always refer to the original Bradex BX60 user manual provided with your specific model, as features and button layouts may vary by production year.
A 4A charger is relatively slow but safe. A general rule for a manual charger is to use 10% of the battery's Amp-Hour (Ah) rating as the charge current. For a standard 40-60Ah car battery, 4A is nearly perfect.
Attach the clamp to the negative (-) terminal of the battery. Step 3: Connect the Clamps (Battery Inside Vehicle) bradex bx60 battery charger instructions high quality
Before plugging the charger into the AC outlet, set the voltage switch (6V or 12V) to match the nominal voltage of the battery you are charging. Step 3: Connect the Clamps
Connect the BLACK (Negative) charger clamp to the negative terminal (or a solid ground on the vehicle chassis if the battery is still installed). Step 3: Starting the Charge Disclaimer: This article is for informational purposes
With the charger now running, use its indicators to track the battery's progress.
Best for maintaining batteries over the winter or safely bringing a deeply discharged battery back to life. This process can take anywhere from 12 to 24 hours. A general rule for a manual charger is
: Includes an integrated output ammeter so you can see exactly how much current is flowing.
| Part | Function | |------|-----------| | | Shows voltage, charge %, mode, faults | | Mode button | Switches between 6V/12V / battery types / recondition | | Clamps (red/black) | Red = positive (+), Black = negative (-) | | Ring terminals (optional) | For permanent mounting |
