Adjustment Program Epson 1390 Resetter Fixed -

Once this counter reaches 100% capacity, the printer enters a hardware lock mode.

Carefully remove the foam pads, rinse them thoroughly under warm water, squeeze them out, let them dry completely, and reinstall them.

You must connect your Epson 1390 directly to your computer using a USB cable. The adjustment program cannot communicate with the printer over Wi-Fi or network sharing.

To reset your and fix "service required" or "paper/ink light flashing" errors, you can use the Epson Adjustment Program (Resetter). This utility clears the waste ink pad counter, which allows the printer to function again after reaching its internal print limit. Steps to Reset the Epson 1390 Preparation : Download a compatible Epson 1390 adjustment program epson 1390 resetter fixed

Press the physical power button on your Epson 1390 printer to turn it off completely. Click on the computer screen prompt. Turn your printer back on.

To use it for diagnostics:

Follow these steps exactly as written. Do not skip any steps, especially the date change and compatibility settings. Once this counter reaches 100% capacity, the printer

Before turning to third-party adjustment programs, consider the following:

This means the software cannot find your printer. Ensure the printer is turned on, the USB cable is securely plugged in, and no other print jobs are stuck in the Windows print queue.

I can provide specific instructions to guide you through the next part of your repair. Share public link The adjustment program cannot communicate with the printer

Right-click the application, go to Properties -> Compatibility , and set it to run in compatibility mode for Windows 7 or Windows XP .

Choose from the model list and select your specific USB port.