Добавить в корзину
Based on its manual and user feedback, the unit is praised for its intuitive interface and steady performance. SelectScience Digital Interface:
Releases the motorized lid lock. This button only functions when the rotor has come to a complete stop. Operating Instructions 1. Preparing and Loading the Rotor
But if you inherit one of these machines without its original documentation, you are in for a puzzle. That’s where the becomes less of a booklet and more of a treasure map.
Unbalanced loads cause severe vibrations that can bend the drive shaft or shatter the rotor housing. If the machine shakes violently upon startup, press Stop immediately. eppendorf 5402 manual
Proper setup prevents mechanical failure, sample loss, and laboratory injuries. Installation Guidelines
To the uninitiated, it looked like a standard piece of technical documentation from a bygone era, complete with meticulously hand-drawn technical diagrams, exploded views of the rotor assembly, and troubleshooting charts that predicted every mechanical failure known to science. But to the scientists who relied on it, the manual was the lab’s ultimate spellbook.
Plug the unit into a grounded electrical outlet matching the voltage specified on the technical plate. Step 2: Loading and Balancing the Rotor Always balance the rotor load symmetrically. Based on its manual and user feedback, the
Check that the air vents are not blocked, and the chamber is free from debris.
Place the centrifuge on a level, stable, and vibration-free surface.
Clean the rotor and the chamber with a mild, neutral detergent (pH between 6 and 8). Do not use aggressive chemicals, acetone, or abrasive cleaners. Operating Instructions 1
Immediately turn off or abort the run. Remove tubes and re-verify symmetrical loading and identical tube weights.
utilize appropriate personal protective equipment (PPE), including lab coats, safety glasses, and gloves, when handling biological samples or cleaning a broken tube within the chamber.
