: Creates a bootable SD card to run the OS directly from the external storage. Legacy Support
A progress bar will appear. Do remove the card or turn off the computer during this process. The log screen at the bottom will display the status. Once the process is finished, the progress bar will be full, and the log will say "Burn End". Step 4: Using the Card Safely remove the SD card from your computer.
Insert your MicroSD card into the USB reader and connect it to your PC. In the PhoenixCard interface, click the . Ensure you select the drive letter corresponding to your card. phoenixcard v424 exclusive
Once complete, power down, remove the card, and reboot the device.
: Click the drop-down menu at the top to target your MicroSD card's drive letter. : Creates a bootable SD card to run
Firmware version mismatch or incompatibility with the specific chip model.
Click the button and browse to select your downloaded firmware file. Choose your Write Mode : The log screen at the bottom will display the status
Click the button. Browse to and select the target Allwinner .img firmware file. Step 3: Choosing the Correct Write Mode
: Allows for the simultaneous recording of multiple memory cards if multiple card readers are connected to the PC. Automatic Device Listing
Unlike the more cluttered, newer versions, v424 features a simple, intuitive interface that highlights essential tools: Img File selection, Disk check, Burn, and Restore. 4. Efficient SD Card Restoration
: Includes a "Clean" function to clear device lists and ensure the card is properly prepared before writing new images. Version v4.2.4 vs v4.3.1